[Fot] Rear diff seal

[fubog1]

Todd it shouldn't leak. You could try it again and just tighten the bolts loosely to hold it in place and wait awhile before tightening.
Another thing I have found is some of the replacement gaskets are junk and will split at the bolt holes when the bolts are tightened,
HTH
Glen

 

 

 

-----Original Message-----
From: Todd Redmond <alfetta95 at optonline.net>
To: fot <fot at autox.team.net>
Sent: Thu, Aug 25, 2016 5:44 pm
Subject: [Fot] Rear diff seal

Friends 
Twice now I've installed the diff cover and out oil in it. And it's dripped out.  I've straightened all the flanges, bolt holes, removed all old gaskets and gunk.  Still leaks. Is there a problem using black Permetex on both mating surfaces along with the paper gasket?  

Thanks
Todd Redmond
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fubog1@aol.com



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20160825/833d6bc4/attachment-0001.htm>