[Fot] TR4 transmission

[Duncan Charlton]

Mike,

After a gearbox rebuild I have found the hubs a little bit sticky if I didn't get plenty of oil into them -- but is there any possibility that you might have gotten an interlock plunger out of place inside the hub?

Duncan

Sent from my iPhone

> On May 7, 2016, at 3:11 PM, Michael Moore <mmoore at mtmcpafirm.com> wrote:
> 
> <image001.gif>
> I had to replace my 3rd gear synchro hub, have everything back together
>  
> Tail shaft will turn when in 1st and neutral, but also turns input shaft in both
>  
> Tail shaft will not turn when in 2nd 3rd or 4th.
>  
> Tranny is out of car.
>  
> Any thoughts what I did wrong?
>  
>  
> Thanks, Mike
>  
> 62 TR4, Race car
> 63 TR4, Street car
>  
> Mike & Becky Moore
> 6050 Ruhl Road, Fairview, PA 16415
>  
> mmoore at mtmcpafirm.com
>  
>  
>  
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/duncan.charlton54@gmail.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20160508/dd70692d/attachment-0001.htm>