[Fot] Dust cap for Upgraded Ft Hub/Axle

[Dennis DeLap]

No - dust cap for a 'stock' hub with upgraded axle.
(the nut is too big for the stock cap)

-----Original Message-----
From: "Kenneth Knight via Fot" <fot at autox.team.net>
Sent: ‎8/‎28/‎2017 10:55 AM
To: "FOT" <fot at autox.team.net>
Subject: [Fot] Dust cap for Upgraded Ft Hub/Axle

A few weeks back some folks were looking for the part # for the dust cap that fits the upgraded hub/front axels for TR-3/4 cars.  I keep a spare in my parts box and it is a Doorman 13973 (Ford).  I was in Pepboys over the weekend and they are in stock for about $5.00.
 
I found that if I run the pop in decorative insert for the wheel center (that cover the dust cap) at least when if the cap pops off you won’t lose it on the track and it helps keep mung out of the wheel bearing.
 
Ken
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20170828/cb785e24/attachment-0001.htm>