[Fot] Where to get long Spitfire wheel studs

[Mike Harmuth]

FYI
stock spitfire length 7/16 upgrade Dorman P/N 610-168

There is a slightly longer 7/16" stud Dorman # 610-156. The shoulder is the
same as stock, 3/8" , the  length is a little more, 1 23/32" but the
knurled part is slightly larger, .577" vs .572"

Actual measurements
Stock Spit 3/8"stud
Knurled part - 0.521 "
Shank - 0.496"
Length 1 5/8"

Dorman 610-168 7/16"-20
Knurled part - 0.512 "
Shank - 0.493"
Length 1 5/8"

Dorman 610-156 7/16" - 20
Knurled part - 0. 566"
Shank - 0.544"
Length 1 23/32"

drill for 610-156 - 35/64'
Also, you need to grind a flat spot on one end so it clears the hub radius

Hope the picture attaches.

mike h
[image: Compare.JPG]

On Tue, Apr 23, 2019 at 2:44 PM Henry A. Morrison via Fot <
fot at autox.team.net> wrote:

> We need some longer than stock wheel studs to hold the wheels on our
> Spitfire.  Anyone have a good source?
>
> Cheers, Henry Morrison
>
> Sent from Outlook <http://aka.ms/weboutlook>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage <http://www.team.net/pipermail/fotUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/fot/ofracer@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20190423/e1493aa2/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Compare.JPG
Type: image/jpeg
Size: 221829 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20190423/e1493aa2/attachment-0003.jpe>