[Fot] laycock clutch question
van.mulders.marcel at telenet.be
van.mulders.marcel at telenet.be
Fri May 24 05:25:55 MDT 2019
So we don't agree; maybe, if the fingers end up flat after tightening, it still can be normal, but if they are pointing inwards a bit, it is not correct. You can made a decision by measuring how much the fingers are moving inward when tightening the bolts : if it is more than 3 mm it is not correct and the feel in the clutch pedal won't be normal eather.
Marcel.
Van: "fot" <fot at autox.team.net>
Aan: "Brian Schirano" <bschirano at yahoo.com>
Cc: "fot" <fot at autox.team.net>
Verzonden: Vrijdag 24 mei 2019 12:19:17
Onderwerp: Re: [Fot] laycock clutch question
Brian;
All perfectly normal.
Just be sure that the throwout bearing is compatible with the “fingers.” If the fingers are straight the throwout bearing face should be rounded. If the fingers have a crook in them (bent) then the throwout bearing face should be flat.
Enjoy your new clutch!
Phil Gott
Sent from my iPhone
On May 23, 2019, at 10:23 PM, Brian Schirano via Fot < [ mailto:fot at autox.team.net | fot at autox.team.net ] > wrote:
Hey Friends
just installed a new to me (rebuilt) laycock PP and a new clutch disc. As I tightened the PP the fingers ended up pretty much flat across, no longer peaked. So when the hydraulics is engaged the throw out will press the clutch fingers deflecting inward (invert from when on the bench). Makes me uncomfortable / doesn't seem right.
Normal / Correct?
am hoping to put the trans back in tomorrow afternoon, comments please
Thanks
Brian
26A GT6+
Brian Schirano
585-305-0349 Cell
[ mailto:BSchirano at yahoo.com | BSchirano at yahoo.com ]
BQ_BEGIN
_______________________________________________
[ mailto:fot at autox.team.net | fot at autox.team.net ]
[ http://www.fot-racing.com/ | http://www.fot-racing.com ]
Donate: [ http://www.team.net/donate.html | http://www.team.net/donate.html ]
Archive: [ http://autox.team.net/archive | http://autox.team.net/archive ] [ http://www.team.net/pipermail/fot | http://www.team.net/pipermail/fot ]
Unsubscribe/Manage: [ http://autox.team.net/mailman/options/fot/vfracing@aol.com | http://autox.team.net/mailman/options/fot/vfracing@aol.com ]
BQ_END
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/van.mulders.marcel@telenet.be
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20190524/6dc6836b/attachment-0001.htm>
More information about the Fot
mailing list