[Fot] TR6 Master cylinder alternatives

[John Styduhar]

Ive got the same setup on my TR6.  I ended up making minor adjustments to
the rod from the brake booster to reduce the free travel, but with caution
since an overextension will result in locked brakes.   Check this link out
where they found a Wilwood master cylinder to their TR6
http://tr6.danielsonfamily.org/wilwood_master_cylinder.htm

On Fri, Apr 17, 2020 at 8:55 AM Jerry Van Vlack via Fot <fot at autox.team.net>
wrote:

> Folks,
>
> I’ve converted my TR4A to the dual TR6 with booster braking system.
> Recently I did the Toyota front caliper and larger rear wheel cylinder
> conversion. Braking is great but I don’t care for how far the pedal travels
> before engaging the brakes. I know I’m moving more fluid due to the
> increased size of the combined piston areas over the stock system.
>
> My question is has anyone who has also done the Toyota caliper and larger
> rear wheel cylinders found a larger displacement master cylinder that is a
> bolt in replacement for the TR6 master cylinder and what is your result?
>
> JVV
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage <http://www.team.net/pipermail/fotUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/fot/johnstydo@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20200417/08c06018/attachment-0003.htm>