[Fot] TR3 front apron help

[DAVE HOGYE]

Hi Greg,
There are a few good angled shots of the apron on my resto video.
Especially at 10:58.
Dave H.
https://www.youtube.com/watch?v=UW-cSGzyKXs
> On 08/24/2020 6:32 PM Greg Blake via Fot <fot at autox.team.net> wrote:
> 
>  
> Folks. Need some help with the shape of the lower section (below the grill opening) of the front apron on a large mouth TR3. I cut up and welded new metal on the front of the race car and I’m pretty sure it is no where near the stock profile. 
> 
> My 14 year old son and I are rebuilding his 3 and it has obviously met a few curbs in it day. The lower section is folded back and I don’t have a good goby to make templates. 
> 
> Can one of you fellow 3 care takers send us a to scale profile of that lower section?  I think one for middle and one for each side just inside the bumper plinths would get us close enough. I’d really appreciate the help, so would Will the owner. 
> 
> Attached is a photo of Will working the rear corner that had 1/2” of bondo when we stepped the car.  He is grinding off the remnants of the studs he used to pull the dent  properly   
> 
> Thanks. 
> 
> Greg
> 
> Sent from my iPhone_______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/dlhogye@comcast.net