[Fot] Float needle valves

[Erik Jacobsen]

 Phil,I use the plain old solid needles in both street and race cars and haven't had any issues. They do wear out eventually, but after 7 years in the race car, I still haven't had a problem.
Jake
    On Wednesday, March 17, 2021, 10:13:30 AM CDT, Joe Boruch via Fot <fot at autox.team.net> wrote:  
 
  Phil, years ago I stopped using Gross Jets, which have the spring loaded ball on the end of the float needle.  I suspected some flow issues and others had said that they had issues.  JoeB
    On Wednesday, March 17, 2021, 08:16:11 AM EDT, Phil Gott via Fot <fot at autox.team.net> wrote:  
 
 Anyone have experience with needle valves that do not have the spring loaded contact where the needle valve rests on the float? Is a solid one better, worse, or require different set up?
Phil Gott

Sent from my iPhone
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jaboruch@yahoo.com


  _______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/kekjacobsen@yahoo.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20210317/377709ae/attachment-0003.htm>