[Fot] Pistons

[Tony Sheach]

Hi folks

I have a set of Wiseco 89mm pistons that i bought maybe 10 years ago I was going to use in a torquey rally engine with a set of Carillo rods - is there an issue with piston / liner clearances as some have said ? Or is it just a question of not letting the engine run over hot ?

I have Venolia’s in my other bigger capacity engine and they have been great, but I’m not so sure about Uk supply any more. They also needed the longer Carillo rods, so if I go that route I end up with a set of pistons I don’t need.

What’s the advice from the wise ?

Regards

Tony

Sent from my iPad

On 3 Feb 2023, at 16:22, DAVE HOGYE via Fot <fot at autox.team.net> wrote:


I believe that J&E owns Wiseco.  The Kipp family in Ohio started Wiseco and owned it until a few years ago.  I found this out when I called J&E about ordering pistons, or I called Wiseco.  Can't remember who I called first.  Tom Kipp was a top AMA Super Sports and Super Bike racer during the '90s.  Wiseco was a big sponsor of AMA and might still be.  I installed a Wiseco 1200cc piston kit in my '93 H-D Sportster way back in the '90s.
Dave H.
On 02/03/2023 4:41 AM Erik Jacobsen via Fot <fot at autox.team.net> wrote:





_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony.sheach@live.co.uk


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20230203/5b02bc64/attachment.htm>