[Fot] Rear Main Cap

[Rod Pierce]

The image shows the rear main cap and bearing on a small journal 1300.

As you can see, there is an offset between the two bearing halves.

I was attempting to mix and match parts from my parts bin.

I'm curious about the source of the offset.  Is there a difference in end
caps from year to year on the 1300 or is there a difference from engine to
engine when they were manufactured?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20230318/a1525c2e/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20230318_081635.jpg
Type: image/jpeg
Size: 612123 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20230318/a1525c2e/attachment.jpg>