[Fot] 6 cyl. tappet removal

[JS Performance Motoring, LLC]

Anthony,

       Seeing as how the tappets must come up above the deck surface of the
block to remove them, you'd basically have to project all 12 tappet bores
up through the head.  I don't think there is enough material in the head to
do that without breaking through.  This is a great idea, and I'd love to be
wrong, so if you figure out a good solution, please do share!


Jason Sukey
JS Performance Motoring, LLC
440.984.7720
jason at jsperformancemotoring.com
https://www.facebook.com/JSPerformanceMotoring/


On Fri, Oct 13, 2023 at 9:08 AM Anthony Parker via Fot <fot at autox.team.net>
wrote:

> Has anyone successfully modified the 6 cyl. heads to allow for tappet
> removal with the head installed on the block?
> I would really like to be able to check for tappet and cam wear without
> the trouble of removing the head.
>
> Thank you,
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage <http://www.team.net/pipermail/fotUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/fot/jason@jsperformancemotoring.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20231013/0a672142/attachment.htm>