[Fot] MK 1 or 2 Valance

[Mark Craig]

Morning Membership!

Recently my race trailer was totaled by a Semi. The 1963 Spit has damage, and I am in need of a front valance to help put her back together. Does anyone have one they would part with?? Please advise and thank you all.

Almost forgot I also need both the left and right hand side welded on fitting on the cowl sides where the threaded adjustable rubber tips from the bonnet fit into the dished receiver to center the bonnet when you close it. These would need to be cut off a junker with a saw or torch. Moss calls them Bonnet Peg Locating Plate and Side Plate, Hood Guide, RH or LH. In this pic it is part 63 and 58. 63 uses Phillips screws to attach to 58 which is welded to the cowl sides.
[Inner Body Panels]

Mark L. Craig
417 Briksbury Drive
Franklin, TN 37067
615-347-0260

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20260805/5f410a57/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 206423 bytes
Desc: image001.jpg
URL: <http://autox.team.net/pipermail/fot/attachments/20260805/5f410a57/attachment.jpg>