[Healeys] Help! ignition Guru

[Norman Nock]

Dave ...There should be a fibre washer between the
drive dog and the distributor body , maybe yours is
missing ... the drive dog should be close to zero 
clearance when fibre washer is in place ... AS PER
LUCAS 
... more info on page 156 in my Tech Talk book ...
Norman Nock

--- Dave Schweninger <quenty at ntelos.net> wrote:

> Does anyone have the distance dimension from the
> shoulder that the  
> rotor rests on down to the top of the distributer
> body. For some  
> reason my distributor shaft is pushing the rotor
> into the cap. My  
> measurements show a .030 interference I would think
> the shaft is  
> about .060 too High. Also the end play on the shaft
> is .023. I am now  
> the owner of a melted Rotor.
> thanks
> Dave and Daisy  Now with a gorgeous body.
> _______________________________________________
> sjnnock at sbcglobal.net 
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys