[Healeys] BJ8 Painting engine compartment
Alan Seigrist
healey.nut at gmail.com
Wed Nov 21 18:37:20 MST 2007
Ken -
Yeah definitely listen to David on this one. It will be MUCH faster and
easier to remove all the components with wires attached and let it hang
down. Masking the wiring loom would probably take about 3 times as much
effort as just taking the stuff off.
Alan
On Nov 22, 2007 7:40 AM, Freese, Ken <Kendall.Freese at aerojet.com> wrote:
> I have my engine back from the dyno. 160hp max at 5000 and 175 to 183
> ft-lb from somewhere under 2700 RPM to 4800. No oil leaks either.
> Of course my engine compartment is way to scruffy not to put the engine
> in.
> I just got a quart of paint mixed up in OE White and cut a new piece of
> firewall insulation. Any tips on masking the wiring harness and
> electrical components under the bonnet?
> Thanks,
> Ken Freese
> 65 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
More information about the Healeys
mailing list