[Healeys] 62bt7

[Warthodson at aol.com]

A friend had a similar problem with a tank that had been coated inside. He 
found that the coating was separating from the tank. A large "sheet" of the 
coating would float up to the pick up in the tank and plug the pick up. Blowing 
back into the tank would temporarily release the coating from the pickup, but 
the problem would return after driving for a short time. It was difficult to 
determine that this was the problem because the sheet of coating was too large to 
go into the pickup tube & show up in the filter. 
Gary Hodson  
 
 
 
In a message dated 10/9/2007 10:33:20 AM Central Daylight Time, 
kansl at net1plus.com writes:

quick kote was put into the gas
tank 


 
 
In a message dated 10/9/2007 10:33:20 AM Central Daylight Time, 
kansl at net1plus.com writes:

quick kote was put into the gas
tank 





************************************** See what's new at http://www.aol.com