[Healeys] upper trunion bushings

[David Nock]

Brad, the only way to properly set up the upper trunnion is to set it  
on a alignment rack. So what we do is set the offset in the center of  
the arc and then take the car to our alignment shop and have the set  
the camber and toe. You want to set the camber at.
Camber 		left		Between 0 and 1/4 degrees neg
			right	Between 0 and 1/4  degrees neg	
Toe 		1/8 toe in


David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767

www.britishcarspecialists.com
.
.

On Mar 16, 2008, at 7:37 AM, mail.maineguide.com wrote:

> I just purchased new bushings for my BJ8 from BCS including the  
> offset upper
> trunions. To show how brain dead I am I can't figure out which way the
> offset should go. Many thanks
> Brad Holden