[Healeys] Steering Arm Removal

[Dave Russell]

To add one more to the puller list:

http://www.thetoolnetwork.com/tierod_puller_pt_stw_12616.html
The Stahlwille puller is very compact, will remove A-H steering arms 
with the gear in place, & will remove even the tightest arms & tie rod 
ends with ease. No danger of doing damage to the delicate steering 
housing or gear.

A bit expensive but IMO worth it.

Dave Russell

Bob Spidell wrote:

>Or here:
>
>http://search.harborfreight.com/cpisearch/web/search.do?keyword=pittman+arm+puller&Submit=Go
>
>bs
>
>Michael Salter wrote:
>  
>
>>A Pitman arm puller of the type shown on this page
>>http://www.toolking.com/otc(divisionofspxcorp.)_otc7314a.aspx
>>is ideal for the job, BUT you almost always have to use a protection nut and
>>plate on the top of the thread. 
>>This is because the split pin holes in the shaft weaken that area so much
>>that the pressure of the puller will crush the shaft. 
>>To prevent this I always leave the nut on the thread so that the end face of
>>the nut is flush with the end of the shaft and then I put a piece of 1/4"
>>thick steel over the end for the Pitman arm puller screw to press upon.
>>
>>Michael Salter