[Healeys] Fasteners securing cardboard fuel filler pipe BJ8 ?

[Len and/or Marge Hartnett]

Wes:  To answer your question, I believe that my Healey is original in this 
area.  It has always been just the Phillips head screws.  No finishing 
washers.

(The Other) Len
Vacaville, CA, USA
1967 AH 3000 MkIII, HBJ8L39031


----- Original Message ----- 
From: "Weston Keyes" <westonkeyes at hotmail.com>
To: "Ahealey Ahealey" <healeys at autox.team.net>
Sent: Thursday, April 02, 2009 5:12 AM
Subject: [Healeys] Fasteners securing cardboard fuel filler pipe BJ8 ?


> Hello Folks,
>
>    This is a niggly point, I know
>
> What fasteners arre correct for holding the cardboard panel over the 
> filler
> pipe in the boot of a late BJ8? The Concourse guidelines say: "secured 
> with
> chrome Phillips pan head screws". My vendor went me chrome oval head 
> screws
> with finishing washers for this application. Any originals out there?
>
> Thanks
>
> Wes Keyes
> York,Maine
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as thehartnetts at earthlink.net
>
> http://www.team.net/archive