[Healeys] exhaust header

[Eric (Rick) Wilkins]

I have the stainless steel version of the header and have not  
installed it. I did test fit it and found major interference with the  
throttle actuating levers where the pedal shafts come up from the  
pedal box towards the overdrive relay and throttles.

I haven't et figured a solution. I bought the header over 10 years ago.

Wilko

On Apr 22, 2009, at 6:59 AM, Warthodson at aol.com wrote:

> I would like to hear the experiences from anyone that has installed  
> a Denis
> Welch exhaust header #CEXS120 on a left hand drive 3000. I am aware  
> of the
> modifications required to the intake manifold & the outrigger (if  
> not a
> BJ8). These areas are not where I am experiencing problems.
> Thanks,
> Gary Hodson
> **************Access 350+ FREE radio stations anytime from anywhere  
> on the
> web. Get the Radio Toolbar!
> (http://toolbar.aol.com/aolradio/download.html?ncid=emlcntusdown00000003 
> )
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as e-wilkins at cox.net
>
> http://www.team.net/archive