[Healeys] Healeys Digest, Vol 3, Issue 584

[Bob Spidell]

The shroud support is bent back about 15-20 degrees, and the bracket that bolts/screws to the shroud is a bit different. 


Bob Spidell -- San Jose, CA 
--------------------------- 
"You know you're getting old when you stoop to tie your shoelaces and wonder what else you could do while you're down there."--George Burns 

----- Original Message ----- 
From: Editorgary at aol.com 
To: healeys at autox.team.net 
Sent: Friday, August 21, 2009 3:32:45 PM GMT -08:00 US/Canada Pacific 
Subject: Re: [Healeys] Healeys Digest, Vol 3, Issue 584 

In a message dated 8/21/09 2:44:05 PM, healeys-request at autox.team.net 
writes: 


> 
> Can anyone help me with info, pictures, diagrams or dimensions of the bend 
> in 
> the shroud support to clear the cold air box. I don't want to guess. 
> Thanks 
> Ray Juncal 
> 

Recalling from memory here, but I beleive that the shroud support on the Le 
Mans modifications was different from the original shroud support, or there 
was an additional piece added to clear the cold air box. 
Gary