[Healeys] wiring harness

[Simon & Christine Atkinson]

Thanks to all. mystery solved. heater motor switch.

Thanks!

 

  _____  

From: WILLIAM B LAWRENCE [mailto:ynotink at msn.com] 
Sent: Sunday, January 04, 2009 1:30 AM
To: satkinson7314 at charter.net; healeys at autox.team.net
Subject: RE: [Healeys] wiring harness

 

I have a case of battling references. The Autopress manual by Kenneth Ball
shows Green/Brown (GN) as being the wire between the turn signal flasher and
terminal 1 on the brake/turn relay box. The Drake manual agrees with that
information, but also shows a GN wire between the heater switch and the
heater motor. Ball shows a GY wire for that. I guess its a matter of
isolating the GN wire and tracing it to its end. 

 

Have fun.

 

 

Bill Lawrence

> From: satkinson7314 at charter.net
> To: healeys at autox.team.net
> Date: Sat, 3 Jan 2009 23:29:57 -0500
> Subject: [Healeys] wiring harness
> 
> Just want to make sure (since I can't find this on the wiring diagram).
> 
> 
> 
> I installed a new wiring harness today and everything matches up EXCEPT. I
> have two wires coming out of the of the instrument cluster (smaller
section
> of this harness) that are GREEN and GREEN/Brown. These wires branch off
from
> the key switch (WHITE, WHITE, BROWN/blue).
> 
> Are these mystery, at least for me, wires for the small green warning lamp
> and wired to the dynamo(generator)? This is the only reference to
> GREEN/Brown that I can find.
> 
> 
> 
> Thanks,
> 
> 
> 
> Simon
> 
> 1959 BT7L
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> You are subscribed as ynotink at msn.com
> 
> http://www.team.net/archive