[Healeys] Heat insulation

[Ghess4]

Thanks Rich,
I've put a new frame under my BJ8 and after sand blast, undercoat and paint 
it looks so good that I hate to cover it up!!  Guess I'll just drive it 
without the outer panels!!  (ha)  I've used the stuff that looks just like 
the asbestos but it doesn't look professional to me no mater how good I fit 
the panels around the foot well.
Thanks again.
Gale Hess

----- Original Message ----- 
From: "Rich C" <richchrysler at quickclic.net>
To: "Healeys" <healeys at autox.team.net>; "Ghess4" <ghess4 at cox.net>
Sent: Wednesday, January 14, 2009 7:27 PM
Subject: Re: [Healeys] Heat insulation


> Asbestos insulating panels were used on the engine side of the left 
> footwell right from the earliest preproduction Hundreds.
> The earliest were somewhat smaller and didn't cover as well, but were 
> there never the less.
>
> Rich Chrysler
>
> ----- Original Message ----- 
> From: "Ghess4" <ghess4 at cox.net>
> To: <healeys at autox.team.net>
> Sent: Wednesday, January 14, 2009 8:17 PM
> Subject: [Healeys] Heat insulation
>
>
>> Can anyone tell me whether the insulating panels on the foot well in the
>> engine compartment were installed on the early healeys or was that 
>> something
>> that was added later?
>>
>> Thanks
>> GHess
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> You are subscribed as richchrysler at quickclic.net
>>
>> http://www.team.net/archive