[Healeys] BJ8 location of support bracket for glove box?

[Rich C]

Wes,
Straight behind (or rather in front of) the deepest part of the glove box 
interior liner, there should be two small screws holes near the bottom of 
the scuttle box section. A simple L bracket screws onto the scuttle box 
section and extends back from this mounting point to a single screw with 
flats and nut into the bottom end of the inerior liner.

Rich Chrysler
----- Original Message ----- 
From: "Weston Keyes" <westonkeyes at hotmail.com>
To: "Ahealey Ahealey" <healeys at autox.team.net>
Sent: Tuesday, January 20, 2009 11:55 AM
Subject: [Healeys] BJ8 location of support bracket for glove box?


> Hello Folks,
>
>      Thanks for your continued support!
>
> I can't fine any holes in the body to attach the glove box support. Mine 
> is a
> RH drive but I imagine it is symmetrical to a LH drive.
>
> Thanks
>
> Wes Keyes
> York, Maine
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler at quickclic.net
>
> http://www.team.net/archive