[Healeys] aluminum shroud

[Bob Spidell]

Cool ... the shrouds were TIG-welded, hand-finished with no filler required. Pretty advanced stuff for the time, methinks. 

Another one for the English<->American dictionary: Argonarc==TIG 


bs 



----- Original Message ----- 
From: "andy pole" <ampole at hotmail.com> 
To: vern at srvinet.com, healeys at autox.team.net 
Sent: Friday, July 24, 2009 8:21:32 AM GMT -08:00 US/Canada Pacific 
Subject: Re: [Healeys] aluminum shroud 

Vern 



There has been alot of discussion if you search the archives: ie click on the 
> http://www.team.net/archive on any email from the list and try searching 
shroud welding etc, you will get plenty of info. 



One material recommended is 0.063 inch thick 6061-T6 alloy for the shrouds, 
some have tig and some gas welded, everyone will have an opinion. 



And heres the link to the original jensen stuff: 
http://www.users.bigpond.com/acmefluid/jensenweld.html 



cheers Andy 



You are subscribed as bspidell at comcast.net 

http://www.team.net/archive