[Healeys] trafficator

[Bob Spidell]

Hard to diagnose based on the limited info, but sounds like two separate problems. 

IIRC, when pressed the horn button grounds the circuit to the horns. Since they're not working, I suspect the circuit to ground is open or broken, which may or may not have something to do with the flasher problem. 


Bob 



----- Original Message ----- 
From: "Bob Johnson" <bjsbj8 at gmail.com> 
To: "john doe" <rccpl1 at yahoo.com> 
Cc: Healeys at autox.team.net 
Sent: Monday, June 29, 2009 10:44:57 AM GMT -08:00 US/Canada Pacific 
Subject: Re: [Healeys] trafficator 

Are you saying that when you move the trafficator to a right or left 
turn that after you complete the turn the signal does not get 
canceled? If so, it could be the way that the screws that hold the 
steering wheel on may need to be adjusted. At least that seems to be 
what fixed my non-canceling problem. Also, just make sure that you 
have the cancellation pegs on the proper sides of the assembly. IMHO, 
the right way looks wrong, but it isn't. 

Bob Johnson 
BJ8 

On Sun, Jun 28, 2009 at 5:14 PM, john doe<rccpl1 at yahoo.com> wrote: 
> had to repair the small stator tube because it broke off now after installing it can't get the horn to work and when i connect the side markers they just keep flashing ant advice