[Healeys] Horn

[Bob Haskell]

Simon,

The horn circuit goes from the battery, to the starter solenoid, to the 
'A' post on the voltage regulator, to the 50 amp fuse, to the horns, to 
the horn button on the trafficator, to ground (steering column).  It 
doesn't go through the ignition switch.  I'd step through each point 
checking for 12 volts.

The spring under the horn button is correct.

Bob

Simon Lachlan wrote:
> One for the wise ones............
> (I have a MkII BT7)
> My horns aren't working. I have done a little digging...
> With ignition on..There is no current at the horn push and there does not
> appear to be any current in/at the top fuse which I believe only does the
> horn.
> I haven't looked much further except in the books as I'm waiting for
> daylight.
> Any suggestions?