[Healeys] under dash insulation pad

[john spaur]

Ira,

I believe are talking about the tar paper insulation that is glued to 
the bulkhead behind the heater. I am going to see if I can make it 
this weekend. Not sure how I am going to cut perfect holes yet but I 
thought I would try before buying. The holes line up with the holes 
in the bulkhead and you would have to remove the cables or cut down 
to the holes to slip it in place if you can even do that with the 
heater and other items installed.

John
BT7

At 02:52 PM 4/22/2010 -0700, I Erbs wrote:
>found on page 31 Nocks hard to find parts.
>does this fit behind or above the heater assembly?
>I Erbs