[Healeys] Coils inside relays

[Bob Spidell]

re: " Could one use masking tape to wrap the coils? If not what material 
should be used." 

I just used some silicone tape called 'Xtreme Tape' or something like that (Moss sells it). It stretches and bonds to itself. Think it would work well in this application. 


re: "Would I fry the coil by using a 1.7 volt zinc plating wand to plate 
the screw terminals?" 

PROBABLY not; the relays on Healeys are meant for 12V. Note emphasis on PROBABLY. 


bs 


-------------------------------- 
Bob Spidell - San Jose, CA 

----- Original Message ----- 
From: "john spaur" <jmsdarch at sbcglobal.net> 
To: healeys at autox.team.net 
Sent: Saturday, August 14, 2010 8:04:20 PM 
Subject: [Healeys] Coils inside relays 

Could one use masking tape to wrap the coils? If not what material 
should be used. 

Would I fry the coil by using a 1.7 volt zinc plating wand to plate 
the screw terminals? 

Thank you, 
John Spaur 
_______________________________________________ 
Healeys at autox.team.net 
Donate: http://www.team.net/donate.html 
Suggested annual donation $12.75 
Archive: http://www.team.net/archive 
Forums: http://www.team.net/forums 
Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell@comcast.net