[Healeys] Soda Blasting Small Parts

[Len and/or Marge Hartnett]

The article on Pertronix wire chafing could be of interest to those with 
Pertronix installed.  I was concerned about this problem when I first 
installed the unit on my Healey.  My solution was to install a small wire 
tie around the wires inside the distributor right at the 'grommet' .  This 
prevents the wires from ever being pulled through the grommet and rubbing 
against the rotor.

(The Other) Len
Vacaville, CA, USA
1967 AH 3000 MkIII, HBJ8L39031


----- Original Message ----- 
From: "HealeyRick" <healeyrick at yahoo.com>
To: <healeys at autox.team.net>; <spridgets at autox.team.net>
Sent: Saturday, October 30, 2010 3:00 PM
Subject: [Healeys] Soda Blasting Small Parts


> Saw this cheap DIY soda blaster on another forum.  Looks like it works 
> great
> for carbs: http://www.aircooledtech.com/tools-on-the-cheap/soda_blaster/
>
> Rick