[Healeys] brake pipe threaded ends

[Austin Healey]

"At some point in your brake pipe-making career you will make the best flare
you've ever made then realize you forgot to put the fitting on the tube
first (or you'll put it on backwards).

Guaranteed."

Unbelivabl!. Just exactly how it happened to me! How did You know that :D ?

Gergo

2011/6/19 Bob Spidell <bspidell at comcast.net>

> At some point in your brake pipe-making career you will make the best flare
> you've ever made then realize you forgot to put the fitting on the tube
> first (or you'll put it on backwards).
>
> Guaranteed.
>
> Bob
>
>
>
>
> On 6/18/2011 8:04 PM, john spaur wrote:
>
>> Tom,
>>
>> The flare nut is 3/8" x 24 tpi (BT7 caliper) and you used to be able to
>> find them at most auto supply stores. The nut wrench size will be 3/8" o
>>
> ...
>
>
> ***********************************************************************
> Bob Spidell           San Jose, CA            bspidell at comcast.net
>
> ***********************************************************************
> ______________________________**_________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.**html<http://www.team.net/donate.html>
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/**
> options/healeys/pajtamuvek@**gmail.com<http://autox.team.net/mailman/options/healeys/pajtamuvek@gmail.com>