[Healeys] Starter Problem - Update

[Richard Ewald]

Do a voltage drop test.
Put the positive lead of your voltmeter on the battery side of the
solenoid.  But the neg terminal on the starter side.  Have someone put the
car in crank and read the value on the meter while the key is in the crank
mode.  If it is greater than 0.2V replace the solenoid.

On Wed, Jul 18, 2012 at 1:15 PM, Derek Job <derek.c.job at gmail.com> wrote:

> Ok guys, I jumped the cables from the battery direct to the starter and it
> turned over looking for action. So the starter is Ok.
>
> How can I test the solenoid?
>
> I'm still sceptical that my solenoid packed up at the exact ime I was
> fiddling with the wiring so Im still hopeful it's ok
>
> Derek
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/richard.ewald@gmail.com