[Healeys] Sideshift Transmission Layshaft end float

[Jonas Payne]

Awesome - thanks!  

 

Since the factory manual is mute on these things - what does it indicate for
float on the input and mainshafts?  Or for that matter any other critical
clearances.

 

Jonas Payne

PBR Consulting Services, LLC

702.882.6711

 

From: healeyguy at aol.com [mailto:healeyguy at aol.com] 
Sent: Tuesday, November 19, 2013 12:14 PM
To: healeys at autox.team.net
Cc: jpaynepbr at cox.net; healeybruce at roadrunner.com
Subject: Re: [Healeys] Sideshift Transmission Layshaft end float

 

The Hayne's manual shows 0.021 inch end float for the layshaft. 

Aloha

Perry



-----Original Message-----
From: Jonas Payne < <mailto:jpaynepbr at cox.net> jpaynepbr at cox.net>

I'm rebuilding sideshift 4 speed and can't find the tolerance for end float
on the layshaft in the manual - anybody know what it should be?
 
Jonas Payne
PBR Consulting Services, LLC
702.882.6711