[Healeys] Light Issue

[Oudesluys]

The most likely cause is corroded or dirty connectors and or earth 
connections from the socket to the bodywork. Disconnect, clean and refit 
all connections and do the same with the offending light. When 
reassembled spray some anti corrosion wax on the items.
Kees Oudesluijs
NL


rkeysor schreef op 8-4-2014 0:00:
> I find my left front turn signal light flashing more rapidly and dimly than
> the opposite number on the right front on my BN7.  Conversely, the parking
> light bulb on the left is brighter than that on the right. I've tried
> switching bulbs without success.  I  get a bright light on the wrong filament
> on the right side if I push the bulb into the socket with the incorrect
> orientation. Whether germane or not, I recently replaced the wire from the
> flasher relay to the left front turn light flasher after it stopped working.
>   That restored the bulb's flash function, but it's  rapid and dim, as
> described.  I also removed all of the connections from the flasher unit some
> months back, but I believe I reinstalled the wires correctly. This is the
> second time I have replaced wires to what I'll call parking lights, the
> earlier one to the left rear. In each case I believe the lighst previously
> worked fine.  Puzzling.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2014.0.4355 / Virusdatabase: 3722/7312 - datum van uitgifte: 04/07/14