[Healeys] Splash pan plugs

[Michael]

Thanks to everyone who responded to this request for information.
I have received some great pics and now located some appropriately coloured
material to use for making replicas.
A few happy hours on my lathe should produce satisfactory results.
With driving around looking for material, doing a drawing then machining them
up I should have less than 3 hours in each plug!!!!
Michael S
BN1 #174

-----Original Message-----
From: "Michael Salter" <michaelsalter at gmail.com>
Sent: b9/b9/b2014 10:45 PM
To: "healeys at autox.team.net" <healeys at autox.team.net>
Subject: Splash pan plugs

The Concours guidelines provide details of the 2 plastic plugs in the front
splash apron (behind the bumper) on the 100 as follows:
"Two slightly domed dark tan, dark brown or dark red colored plastic buttons,
11/32 inch in diameter, were pressed into holes at the top front of this
shield behind the bumper over riders. These buttons were not painted."

Does anyone out there have any more details on these plugs, a source for them,
or perhaps detail photos.


Many thanks,

Michael S

BN1 #174