[Healeys] Trunnion nut

[David Nock]

You measure the up and down movement of the spindle on the king pin. You can use a large screwdriver and move the spindle assy to measure the clearance.

David Nock
healeydoc at sbcglobal.net
209 948 8767
www.britishcarspecialists.com

From: Fred Wescoe 
Sent: Friday, April 24, 2015 7:48 AM
To: healeys 
Subject: [Healeys] Trunnion nut

I am assembling the fulcrum pins (king pins) on the front end of my BJ7.  The manual says only "tighten the trunnion nut".  The book also says there should be .002" of play.  Where do I measure the play and is there a recommended torque for the trunnion nut?  I am hoping someone has done this and can guide me on this.


Thanks,


Fred



--------------------------------------------------------------------------------
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150424/cdde7152/attachment.html>