[Healeys] steering box

[Mike]

Well, thanks to all who offered advice on my steering box.  I had to 
hunt to find the corn head grease, but cleverly pulled out my old grease 
gun and cleaned it out to put the cartridge in.  Guess what?  The grease 
gun was made before they thought of cartridges. Would not fit.  So off 
to FLAP to buy a new one, which worked fine.  With the zirc fitting on 
the end removed, the tip just fit in the hole and I filled it up.  Will 
check it again after some miles.  So far so good.


-- 
Mike

MGTD (long gone)
BN1 (long gone)
BN2-100M (gone but in good hands)
BJ8