[Healeys] Tool for removing SU carbs

[Harold Manifold]

https://store.snapon.com/Hand-Tools-C700010.aspx
 
The wrench you are looking for should be available through the link above.

  _____  

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Oudesluys
Sent: Friday, August 25, 2017 12:34 AM
To: healeys at autox.team.net
Subject: Re: [Healeys] Tool for removing SU carbs


Any decent tool store will have a collection of various sizes of this wrench
in closed ended form, it is called a starter wrench around here. It is easy
enough to grind the slot in one end.
Kees Oudesluijs


Op 24-8-2017 om 23:13 schreef Bob Simmen:


Having just received the Sept. 2017 issue of Healey Marque Magazine, I
quickly read the Technical Service Bulletin article Big Healey, Big
Carburetors.  I will be mounting my rebuilt carbs in the next week or two.
On page 39 it show a picture of "Special tools required for nut removal"
(see attached).  Although I have a large supply of the tool on the left, and
the tool on the right is always on my workbench, I am in desperate of need
of the tool in the middle.  Does anyone have a part number and source that I
might be able to purchase this wrench.

 

Thanks in advance for your help.

 

Bob

 

 


 

_______________________________________________

Support Team.Net http://www.team.net/donate.html

Suggested annual donation  $12.75

Archive: http://www.team.net/archive

Forums: http://www.team.net/forums



Healeys at autox.team.net

http://autox.team.net/mailman/listinfo/healeys



Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl






-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170825/2e5ead69/attachment.html>