[Healeys] Emergency brake bracket

[David Nock British Car Specialists]

The spacer should slide off. Then pull the carpet back and remove the driveshaft. Then you can heat the nut to a slight red and remove the broken bolt with vice grips


David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767

www.britishcarspecialists.com

Please feel free to view an interview with the Nock's in 2009
	Enjoy	
www.youtube.com/watch?v=QOTTRYkbQzs
.
.

Sent from my iPad

> On Feb 3, 2018, at 4:10 PM, Robert Begani <rfbegani at gmail.com> wrote:
> 
> Hi David:
> 
> Just so happens I have the Tunnel available for your viewing pleasure. See
> attached photos of the bracket.  My emergency brake has not been on the car
> for several years as the cable broke.  I could not put the brake on the
> bracket because the head of one of the screws was drilled out to get it off.
> My next project is to get the frozen screw out and then find a reasonable
> replacement.
> 
> Regards,
> 
> Bob Begani
> BJ8 67
> <IMG_0408.JPG>
> <IMG_0409.JPG>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc@sbcglobal.net
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180204/b77dc1ed/attachment.html>