[Healeys] Torque Setting?

[Keith Pennell]

Yes Mike.  Torque it until the threads strip then back off 2 flats.Sorry - feeling silly tonight.

-----Original Message-----
From: Mike MacLean <rrengineer.mike at att.net>
To: healeys <healeys at autox.team.net>
Sent: Sun, Jul 14, 2019 6:43 pm
Subject: [Healeys] Torque Setting?

Is there a torque setting for the nuts that screw onto the hub studs to the disc brake rotor.  This is the early disc setup (3000) that I am converting my BN2 with.  I don't have any literature for later Healeys.Mike MacLean_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/llennep@verizon.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190714/192dd190/attachment.html>