[Healeys] fuel sending unit gasket

[Bob Spidell]

FWIW, the viton gaskets didn't work for me; cork with a sealant did.


On 5/23/2019 9:46 AM, Michael MacLean wrote:
>      Not that I am endorsing them, but Moss recommends the use of 
> Hylomar AF specifically for this purpose.  By the way, it would be a 
> positive upgrade to use the Viton replacement gaskets also available 
> from Moss to replace the old cork type.  While we are at it, you 
> should replace the plastic float (if you have one) with a brass 
> replacement type.  OK, my lecture is over.
>
> Mike MacLean
>
> On Thursday, May 23, 2019, 9:11:08 AM PDT, 
> <simon.lachlan at alexarevel.plus.com> wrote:
>
>
> So, if it sounds and tastes like Hylomar, you should be OK.
>
> Simon
>
> *From:*Healeys <healeys-bounces at autox.team.net> *On Behalf Of *Bob Spidell
> *Sent:* 23 May 2019 17:05
> *To:* healeys at autox.team.net
> *Subject:* Re: [Healeys] fuel sending unit gasket
>
> I've had good results with this (looks, smells and feels like Hylomar):
>
> *https://tinyurl.com/y5mpxw8d*
>
> On 5/23/2019 6:49 AM, Dr C A Rubino wrote:
>
>     What sealant should it use when installing this?
>
>     Thanks
>
>     Carl
>
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/rrengineer.mike@att.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190523/b0abc9b3/attachment.html>