[Healeys] Kenlowe

[Kees Oudesluijs]

There is no such thing as a positive or negative Kenlowe. It has two 
wires, probably red and black. Most likely the red wire should be 
connected to the positive feed, black to earth. Use a thermoswitch 
controlled relay to switch the fan on and of.

Check if the fan is rotating the correct way. if not change over the two 
wires.

Kees Oudesluijs


Op 10-11-2019 om 13:38 schreef simon.lachlan at alexarevel.plus.com:
>
> Hi Experts,
>
> I have a 3000. It is *_Negative earth_*.
>
> I have an opportunity to buy a Kenlowe, second hand, at a very good 
> price. It is *_Positive earth_*.
>
> I imagine that, if I reverse the wires, the fan will run the other 
> way. That’s all very well….goes round and round but will, in effect, 
> be pulling the air rather than pushing. Which is useless.
>
> Is there a solution? Apart from not buying it!
>
> Simon
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20191110/2585b51f/attachment.htm>