[Healeys] Reflector installation

[richard mayor]

At first I used soapy water but it was still very hard trying to pull the
cord.  Then I put some vaseline on the cord and it worked a lot easier.
But, I still had to use gloves because the cord was cutting into my hand as
I pulled.

On Tue, Oct 8, 2019 at 4:23 AM Perry Small <healeyguy at aol.com> wrote:

> Wrap a thin but strong twine or wire around the rubber (in the groove that
> fits on the shroud),feed the twine through the hole,  push the rubber
> against the opening in the shroud and pull the twine from the trunk .
> Should pop into place.
> Perry
>
> Sent from my iPhone
>
> > On Oct 7, 2019, at 10:10 PM, richard mayor <boyracer466 at gmail.com>
> wrote:
> >
> > 
> > I can't get the reflectors installed in the rear shroud.  What's the
> secret?
> > _______________________________________________
> > Support Team.Net http://www.team.net/donate.html
> > Suggested annual donation  $12.75
> >
> > Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
> >
> > Healeys at autox.team.net
> > http://autox.team.net/mailman/listinfo/healeys
> >
> > Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healeyguy@aol.com
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20191012/ace1b370/attachment.htm>