[Healeys] Radiator shovel

[Bob Begani]

Here are pictures of what I fabricated from the picture I got from someone on the list which I no longer have  

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0410.jpeg
Type: image/jpeg
Size: 534555 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20191030/b37c1df5/attachment.jpeg>
-------------- next part --------------

Trim shovel to fit in the framing 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0414.JPG
Type: image/jpeg
Size: 414170 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20191030/b37c1df5/attachment.jpe>
-------------- next part --------------

This is the way it should fit with the flange pointing down however I cut the Valve hole wrong and had to flip flop it. 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0415.JPG
Type: image/jpeg
Size: 587346 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20191030/b37c1df5/attachment-0001.jpe>
-------------- next part --------------

Note the lip should be pointing down so you can install the screws to the frame from underneath an remember to get the hole for the radiator drain valve large enough to install it. 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0416.JPG
Type: image/jpeg
Size: 711979 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20191030/b37c1df5/attachment-0002.jpe>
-------------- next part --------------
Painted same color as the car. Looks good and really funnels air into the engine compartment so you do not overheat down to 30-40 mph 

Bob Begani 

Sent from my iPhone