[Healeys] Fwd: Hi Randy, I am stumped. michael.

[Randy Hicks]

Received this from a friend. Can anyone help out?

Randy

> Begin forwarded message:
> 
> From: michael mc burney <mcb.1 at comcast.net>
> Subject: RE: Hi Randy, I am stumped. michael.
> Date: September 11, 2019 at 4:54:14 PM EDT
> To: Randy Hicks <randyhicks at me.com>
> 
> 
>     Hello Randy, Hate to bother but I am stumped over a simple fastener problem. I am attempting to mount
>     my spare BN2 block onto a engine stand. Problem is with the four fasteners needed to do this. I have tried
>     all the bolts I think should work, but no! I thought the engine plate/xmission, bell housing used 3/8 by 24.
>     The cap screws will thread into the block but will not tighten. Do you/or one in the healey nation/ happen to
>     know the proper cap screw/bolt that will do the trick??? 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190911/46c4becb/attachment.html>