[Healeys] Today's Rant

John Vrugtman javrugtman at htcnet.org
Fri Apr 24 15:32:16 MDT 2020


If you are talking about India, they drive on whatever side they want at 
the moment. Demolition derby.

John

On 4/24/2020 4:29 PM, Robert Begani wrote:
>
> Remember the largest countries by population are driving on the left 
> hand side of the road and are about to become the largest consumers of 
> automobiles thanks to the British Influence
>
> Also, Sweden successfully switched to drive on the right hand side of 
> the road in the 50’s by careful planning and shutting down all roads 
> for several days, to change the traffic lights and signs and paint the 
> pavement.  Doubt that could be accomplished today in any modern country.
>
> Bob
>
> *From:* Healeys <healeys-bounces at autox.team.net> *On Behalf Of *Jean Caron
> *Sent:* Friday, April 24, 2020 3:01 PM
> *To:* Michael Oritt <michael.oritt at gmail.com>; i erbs 
> <eyera3000 at gmail.com>
> *Cc:* Healeys <healeys at autox.team.net>
> *Subject:* Re: [Healeys] Today's Rant
>
> There was a time after Canada had gone metric that a fringe political 
> party, called the Rhinoceros Party, during the provincial election in 
> Quebec, one of their promise if elected, was to switch driving from 
> the right  hand side to the left hand side of the road like in the UK, 
> Australia and Japan but like every good politician, they were going to 
> do it in stages starting with truck, semi-trailers for the first month 
> and cars the following month. Surprisingly they never got elected to 
> fulfill their promise.!!!!!!!!!
>
> Jean
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for 
> Windows 10
>
> *From: *Michael Oritt <mailto:michael.oritt at gmail.com>
> *Sent: *April 24, 2020 1:52 PM
> *To: *i erbs <mailto:eyera3000 at gmail.com>
> *Cc: *Healeys <mailto:healeys at autox.team.net>
> *Subject: *Re: [Healeys] Today's Rant
>
> Metrification has been a success in the street drug trade:  Every 
> school kid knows that there are 28 grams in an ounce.
>
> Best--Michael Oritt
>
> On Fri, Apr 24, 2020 at 12:12 PM i erbs <eyera3000 at gmail.com 
> <mailto:eyera3000 at gmail.com>> wrote:
>
>     Yup,
>
>     The US was going to convert, but busineses and manufacturers
>     raised a storm over the cost to convert, so it never
>     officially happened.
>
>     Ira Erbs
>     Portland,OR
>     59 BN4
>     67MGB
>     65 AH Sprite
>     phone makes it's own choices. Forgive typos
>
>     On Fri, Apr 24, 2020, 2:15 AM <simon.lachlan at alexarevel.plus.com
>     <mailto:simon.lachlan at alexarevel.plus.com>> wrote:
>
>         “Flirted”? To tell the truth, I’d never given it much thought
>         but had “assumed” that the US had resisted metrification.
>         Don’t I recall that all oil-producing kit is Imperial because
>         of US domination in that area? And planes……?
>
>         I do know that, when Ted “The Grocer” Heath dragged the UK
>         into the Common Market, we were supposed to go Metric. There
>         were some hiccups along the way. A pint of beer remains a
>         pint. As did a pint of milk whilst milk bottles still existed.
>
>         EU: “You must cease drinking pints forthwith. You will obey”.
>
>         UK: “Won’t. Can’t. Shan’t”.
>
>         Etcetc Finally:
>
>         EU: “You will obey”.
>
>         UK: “OK. We will keep pint glasses (From which we will drink
>         proper beer unlike your pallid Europ*ss). We will refer to
>         those glasses as “pints” whilst acknowledging that they contain
>
>         568.261ml litres each.
>
>         EU: “Zut, alors. We surrender. Have some cheese”.
>
>         Aren’t we all allowed the occasional rant?
>
>         Simon
>
>         *From:* i erbs <eyera3000 at gmail.com <mailto:eyera3000 at gmail.com>>
>         *Sent:* 24 April 2020 02:55
>         *To:* WILLIAM B LAWRENCE <ynotink at msn.com
>         <mailto:ynotink at msn.com>>
>         *Cc:* simon.lachlan at alexarevel.plus.com
>         <mailto:simon.lachlan at alexarevel.plus.com>; Patrick & Caroline
>         Quinn <p_cquinn at tpg.com.au <mailto:p_cquinn at tpg.com.au>>;
>         Healeys <healeys at autox.team.net <mailto:healeys at autox.team.net>>
>         *Subject:* Re: [Healeys] Today's Rant
>
>         When the US flirted with metrifying and production when to
>         canada and mexico they made standard threaded bolts with
>         metric heads so factories there could use metric tools
>
>         Ira Erbs
>         Portland,OR
>         59 BN4
>         67MGB
>         65 AH Sprite
>         phone makes it's own choices. Forgive typos
>
>         On Thu, Apr 23, 2020, 6:17 PM WILLIAM B LAWRENCE
>         <ynotink at msn.com <mailto:ynotink at msn.com>> wrote:
>
>             I think you have it backwards. The original GM design
>             would have used the UNC thread pattern with a 9/16” bolt
>             head. The design predated metrification in the US by a few
>             decades. When Rover went metric, sometime in the 80s
>             probably, they retained the US standard thread pattern
>             while changing to a metric standard bolt head. It would
>             probably have been more costly to retool the engine
>             castings to switch to a metric thread pattern.
>
>             Bill Lawrence
>
>             BN1 #554
>
>             *From:*i erbs <eyera3000 at gmail.com
>             <mailto:eyera3000 at gmail.com>>
>             *Sent:* Thursday, April 23, 2020 7:13 PM
>             *To:* WILLIAM B LAWRENCE <ynotink at msn.com
>             <mailto:ynotink at msn.com>>
>             *Cc:* simon.lachlan at alexarevel.plus.com
>             <mailto:simon.lachlan at alexarevel.plus.com>
>             <simon.lachlan at alexarevel.plus.com
>             <mailto:simon.lachlan at alexarevel.plus.com>>; Patrick &
>             Caroline Quinn <p_cquinn at tpg.com.au
>             <mailto:p_cquinn at tpg.com.au>>; Healeys
>             <healeys at autox.team.net <mailto:healeys at autox.team.net>>
>             *Subject:* Re: [Healeys] Today's Rant
>
>             Gm did that to rationalize tools as you say, but save
>             money on not converting thread and pitch to metric. I had
>             a 87 Olds with that exact situation. But also standards
>             bolts heads too in some areas.
>
>             Ira Erbs
>             Portland,OR
>             59 BN4
>             67MGB
>             65 AH Sprite
>             phone makes it's own choices. Forgive typos
>
>             On Thu, Apr 23, 2020, 11:39 AM WILLIAM B LAWRENCE
>             <ynotink at msn.com <mailto:ynotink at msn.com>> wrote:
>
>                 In the midst of my recent Rover V8 rebuild I was
>                 surprised to discover that while all of the fasteners
>                 used metric wrench sizes many in the short block used
>                 the UNC thread type ie: a 3/8" coarse bolt with a 13
>                 mm head. I assume that Rover simply continued the UNC
>                 pattern of the original GM castings and changed the
>                 head size to simplify tool inventory.
>
>                 Bill Lawrence
>
>                 BN1 #554
>
>                 *From:*Healeys <healeys-bounces at autox.team.net
>                 <mailto:healeys-bounces at autox.team.net>> on behalf of
>                 simon.lachlan at alexarevel.plus.com
>                 <mailto:simon.lachlan at alexarevel.plus.com>
>                 <simon.lachlan at alexarevel.plus.com
>                 <mailto:simon.lachlan at alexarevel.plus.com>>
>                 *Sent:* Thursday, April 23, 2020 12:20 AM
>                 *To:* 'Patrick & Caroline Quinn' <p_cquinn at tpg.com.au
>                 <mailto:p_cquinn at tpg.com.au>>
>                 *Cc:* 'Healeys' <healeys at autox.team.net
>                 <mailto:healeys at autox.team.net>>
>                 *Subject:* Re: [Healeys] Today's Rant
>
>                 I have a vague memory of what we called “Transitional
>                 Rovers” ie a mix of Imperial and Metric. All ¾ tonner
>                 long wheel-base. All UK based. They may have been
>                 peculiar to the army.
>
>                 Glad I wasn’t in REME…..they had to maintain them.
>
>                 Simon
>
>                 *From:* Healeys <healeys-bounces at autox.team.net
>                 <mailto:healeys-bounces at autox.team.net>> *On Behalf Of
>                 *Patrick & Caroline Quinn
>                 *Sent:* 23 April 2020 00:23
>                 *To:* 'David Nock' <healeydoc at gmail.com
>                 <mailto:healeydoc at gmail.com>>; 'Michael MacLean'
>                 <rrengineer.mike at att.net <mailto:rrengineer.mike at att.net>>
>                 *Cc:* 'Healeys' <healeys at autox.team.net
>                 <mailto:healeys at autox.team.net>>
>                 *Subject:* Re: [Healeys] Today's Rant
>
>                 G’day
>
>                 Not long after I bought my first 100 back in 1972 I
>                 turned 21 and one of the birthday gifts I received was
>                 a set of BSF spanners and sockets. I still have them.
>
>                 Now I have three sets of tools. BSF for the Healey
>                 Saloon. AF for the 100 BN3 and metric for the Hilux,
>                 Mercedes and around the house. There are many
>                 variations of each for specific purposes.
>
>                 Hoo Roo
>
>                 Patrick Quinn
>
>                 Blue Mountains, Australia
>
>                 *From:*Healeys [mailto:healeys-bounces at autox.team.net]
>                 *On Behalf Of *David Nock
>                 *Sent:* Wednesday, 22 April 2020 11:59 PM
>                 *To:* Michael MacLean
>                 *Cc:* Healeys
>                 *Subject:* Re: [Healeys] Today's Rant
>
>                 All the threads on the 100/4 engine are BSF not
>                 Whitworth. Whitworth is a coarse thread.
>
>                 However the wrench sizes are interchangeable. They are
>                 one size apart from each other.
>
>                 The threads on the small plate are 1/4 bsf and the gen
>                 bracket is 5/16 bsf. Also look close there are some of
>                 the studs that go thru into the cooling system.
>
>                 David Nock
>
>                 Sent from my iPhone
>
>                 On Apr 21, 2020, at 10:18 PM, Michael MacLean
>                 <rrengineer.mike at att.net
>                 <mailto:rrengineer.mike at att.net>> wrote:
>
>                     
>
>                     So, I am getting ready to install the head on my
>                     100 short block.  Made sure all the intake valves
>                     have the new seals I bought from British Car
>                     Specialists plus the new set of springs I already
>                     had for the valves.  The two mating surfaces were
>                     cleaned with a white (finest grit) Roloc brush.  I
>                     have the correct head gasket (copper faced).
>                     Tonight was the night to torque the head down to
>                     the block.  My surprise, for some stupid reason I
>                     only ordered 8 new head nuts.  I managed to order
>                     the correct amount of washer for the head.  No
>                     idea what my pea brain was thinking.  Also found
>                     out the head nuts are Whitworth (3/8")  size.  I
>                     have a Whitworth socket set, so tragedy averted
>                     there.  I seem to remember someone talking about
>                     the water jacket blanking plate earlier this week.
>                     That made me look at the front of my block.  Three
>                     studs and an empty hole. No cover.  I managed to
>                     find two blanking covers in my stash of parts and
>                     a gasket in my gasket set.  Woohoo, but no nuts or
>                     lock washers.  Can someone tell me if these little
>                     nuts that I do not have are Whitworth nuts. If so,
>                     what size?  I have a generator bracket, but there
>                     are no threaded studs for the block or nuts to
>                     mount it with.  Once again, Whitworth?  The closer
>                     I get to putting this together the more stuff I
>                     find out I don't have.
>
>                     Mike MacLean
>
>                     _______________________________________________
>                     Support Team.Net http://www.team.net/donate.html
>                     <https://eur05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.team.net%2Fdonate.html&data=02%7C01%7C%7C3ec4564ce2a6411a0ff008d7e8809412%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637233511244294008&sdata=Eup70sEB9dNzjc%2FrzxDUjkqLr0o8KIoVCKMZU4JqZBQ%3D&reserved=0>
>                     Suggested annual donation  $12.75
>
>                     Archive: http://www.team.net/pipermail/healeys
>                     <https://eur05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.team.net%2Fpipermail%2Fhealeys&data=02%7C01%7C%7C3ec4564ce2a6411a0ff008d7e8809412%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637233511244303999&sdata=Wpuk8gUqkvPjl8mcpRkb1M9cYYgGwkG13eHaHdadJzM%3D&reserved=0>
>                     http://autox.team.net/archive
>                     <https://eur05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fautox.team.net%2Farchive&data=02%7C01%7C%7C3ec4564ce2a6411a0ff008d7e8809412%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637233511244303999&sdata=ykbbvOYkOoV98ZCtDkQn6%2BS4EWt%2B4cUURSe2%2BzRH%2FuE%3D&reserved=0>
>
>                     Healeys at autox.team.net <mailto:Healeys at autox.team.net>
>                     http://autox.team.net/mailman/listinfo/healeys
>                     <https://eur05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fautox.team.net%2Fmailman%2Flistinfo%2Fhealeys&data=02%7C01%7C%7C3ec4564ce2a6411a0ff008d7e8809412%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637233511244313993&sdata=6fuQA3c7qlgLLMbq%2FzTJmjMp56qqjAjHDTmC7g%2BBT1A%3D&reserved=0>
>
>                     Unsubscribe/Manage:
>                     http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com
>                     <https://eur05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fautox.team.net%2Fmailman%2Foptions%2Fhealeys%2Fhealeydoc%40gmail.com&data=02%7C01%7C%7C3ec4564ce2a6411a0ff008d7e8809412%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637233511244313993&sdata=F0YAnc7MUfnubQWqdK%2FlPPVQLH815sNK6ahxt92JFz4%3D&reserved=0>
>
>
>                 	
>
>                 Virus-free.
>                 www.avast.com<https://eur05.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.avast.com%2Fsig-email%3Futm_medium%3Demail%26utm_source%3Dlink%26utm_campaign%3Dsig-email%26utm_content%3Demailclient&data=02%7C01%7C%7C3ec4564ce2a6411a0ff008d7e8809412%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637233511244323990&sdata=bEaANuBsH7MOMDn7Bz6jRodzhkCm%2Bw%2F0iRUIlKV26Tw%3D&reserved=0>
>
>                 <https://eur05.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.avast.com%2Fsig-email%3Futm_medium%3Demail%26utm_source%3Dlink%26utm_campaign%3Dsig-email%26utm_content%3Demailclient&data=02%7C01%7C%7C3ec4564ce2a6411a0ff008d7e8809412%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637233511244323990&sdata=bEaANuBsH7MOMDn7Bz6jRodzhkCm%2Bw%2F0iRUIlKV26Tw%3D&reserved=0>
>
>                 _______________________________________________
>                 Support Team.Net http://www.team.net/donate.html
>                 Suggested annual donation $12.75
>
>                 Archive:
>                 http://www.team.net/pipermail/healeyshttp://autox.team.net/archive
>
>                 Healeys at autox.team.net
>                 http://autox.team.net/mailman/listinfo/healeys
>
>                 Unsubscribe/Manage:
>                 http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
>                 <https://eur05.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.avast.com%2Fsig-email%3Futm_medium%3Demail%26utm_source%3Dlink%26utm_campaign%3Dsig-email%26utm_content%3Demailclient&data=02%7C01%7C%7C3ec4564ce2a6411a0ff008d7e8809412%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637233511244323990&sdata=bEaANuBsH7MOMDn7Bz6jRodzhkCm%2Bw%2F0iRUIlKV26Tw%3D&reserved=0>
>
>         _______________________________________________
>         Support Team.Net http://www.team.net/donate.html
>         Suggested annual donation  $12.75
>
>         Archive:
>         http://www.team.net/pipermail/healeyshttp://autox.team.net/archive
>
>         Healeys at autox.team.net
>         http://autox.team.net/mailman/listinfo/healeys
>
>         Unsubscribe/Manage:
>         http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
>         <https://eur05.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.avast.com%2Fsig-email%3Futm_medium%3Demail%26utm_source%3Dlink%26utm_campaign%3Dsig-email%26utm_content%3Demailclient&data=02%7C01%7C%7C3ec4564ce2a6411a0ff008d7e8809412%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637233511244323990&sdata=bEaANuBsH7MOMDn7Bz6jRodzhkCm%2Bw%2F0iRUIlKV26Tw%3D&reserved=0>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: 
> http://www.team.net/pipermail/healeyshttp://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.com 
> <https://eur05.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.avast.com%2Fsig-email%3Futm_medium%3Demail%26utm_source%3Dlink%26utm_campaign%3Dsig-email%26utm_content%3Demailclient&data=02%7C01%7C%7C3ec4564ce2a6411a0ff008d7e8809412%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637233511244323990&sdata=bEaANuBsH7MOMDn7Bz6jRodzhkCm%2Bw%2F0iRUIlKV26Tw%3D&reserved=0>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/javrugtman@htcnet.org
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200424/a0a9984a/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 144 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20200424/a0a9984a/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 144 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20200424/a0a9984a/attachment-0001.png>


More information about the Healeys mailing list