[Healeys] 100-4 frame motor mounts

[gradea1 at charter.net]

Check the Robert Bentley version of the workshop manual. On page 374
is the chassis alignment drawing and on 375 are the dimensions.
Although for the BN4, I used some of these numbers on the front end to
align the 100 and they agreed. The longer frame difference is further
back in the car. There isn't a chassis drawing for the 100 that
readily available. This one is useful...its in the factory printing as
well- Section R. It is also online if you look for "A-H chassis
alignment image". Hank, healeyhelper.com

	-----------------------------------------From: "S and T Miller" 
To: "healeys at autox.team.net"
Cc: 
Sent: Wednesday February 19 2020 6:10:05PM
Subject: [Healeys] 100-4 frame motor mounts

  Anyone have positioning specs for the 100-4 frame motor mounts?
Thank you, Shawn

 The Millers

 "Always drive them, but remember each drive in an antique car is a
test drive."

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200220/a8e7fcb1/attachment.htm>