[Healeys] Angle drive screw

[David Nock]

I have seen some old early angle drives that had a grease fitting there. The 
problem is it you greased the angle drive you could very easily push the 
thing apart.



David Nock
healeydoc at sbcglobal.net
209 948 8767
www.britishcarspecialists.com

Help us have our Founder Norman Nock inducteed into the
British Sportscar Hall of Fame, You can vote for your favorites
by visiting the site at.
www.britishsportscarhalloffame.org
-----Original Message----- 
From: Perry Small via Healeys
Sent: Wednesday, July 22, 2020 6:16 AM
To: healeys
Subject: [Healeys] Angle drive screw

The screw is to short to hold anything in place and happens to line up with 
the “screw” gear. If the screw was much longer it would wreck the gear. As 
Jean mention it appears to be the location to lube the gear set.
I did not find a reference to this maintenance task in the manuals but I did 
not look very hard either.

















Perry
Sent from my iPhone





_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com