[Healeys] Heater valve

[Chris Dimmock]

Here in Sydney, Australia, we just turn them off. 
Who needs a heater?
Love your work Perry. 
Chris

> On 27 Sep 2020, at 8:20 am, Perry Small via Healeys <healeys at autox.team.net> wrote:
> 
> Inlet and outlet on the valve is 3/8 inch diameter. Stopper activated by the cable is 1/2 inch diameter. Pocket that it sits in is 5/8 diameter and has three standoffs to center the stopper in the hole. The stopper can move only 1/4 in and out so it stays in the pocket. The available space for water flow is 0.39 inches compared to 0.44 inches for the 3/8 inch internal diameter tubes on the valve. That is about a 25% reduction in flow assuming no pressure change. 
> Not sure what the recommendation is
> to improve this situation using the existing parts but chime in if you have  the answer. 
> PS The patient may have survived the operation.....to live on in another AH. 
> P 
> 
> <IMG_7237.JPG>
> 
> 
> 
> <IMG_7238.JPG>
> 
> 
> 
> <IMG_7239.JPG>
> 
> 
> Sent from my iPhone_______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/austin.healey@gmail.com
>