[Healeys] BN4 steering box bearings

[Michael Salter]

Perhaps you have checked, but in my experience, if the balls need to be
replaced the races will be in bad condition.
If those on the worm are pitted you have a much more serious problem to
deal with.

M

On Sun., Feb. 12, 2023, 5:39 a.m. S and T Miller via Healeys, <
healeys at autox.team.net> wrote:

> Has anyone replaced the individual ball bearings by removing each ball
> from the cage and replacing with new balls in a good cage? My measurements
> are 1/4" balls? Sound correct? Can't see why it wouldn't be possible. I
> realize the entire bearing cages are available, and I also need to replace
> one race.
> TIA, Shawn
>
> The Millers
>
> "Always drive them, but remember each drive in an antique car is a test
> drive."
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230212/6d50905c/attachment.htm>