[Healeys] Austin Healey BN2 overdrive issue

[Michael Salter]

My next step would be to fit a pressure gauge to determine if the problem
is due to residual pressure or the clutch sticking (something I have never
encountered).


On Fri., Jun. 23, 2023, 1:03 p.m. David Wirken via Healeys, <
healeys at autox.team.net> wrote:

> I have a issue with the overdrive not disengaging and becoming stuck in OD
> after disengaging, it’s not an electrical  issue and we have to rock the
> car back and forth until we hear the clutch pop loose and off we go until I
> engage it again and then try to disengage it , I have pulled the operating
> valve and cleaned real good the tiny hole in the shaft and have drilled it
> out one size bigger as directed by a Healey restorer , to no avail.
> Any helpful hints ?
>
> DW
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230623/4981461d/attachment.htm>